Abtech’s buildings are prefabricated in factory and arrive on site ready for assembly.
Due to the lightweight nature of the beams and columns, heavy lifting equipment is not normally required during erection.
If our customers choose the self build option; they will be supplied with detailed assembly instructions and drawings. Each structure is predrilled to make assembly simple needing just a few tools.
All Abtech Steel Buildings are manufactured from cold rolled pre-galvanised steel. The structures high strength to weight ratio makes the overall building very strong but also lightweight. This reduces the need for expensive foundations with a 150mm deep floor slab usually being sufficient to support the building.
The Abtech Steel Building uses high-tensile, pre-galvanised steel, cold rolled into an incredibly strong C-section, as the structural elements of the building. The columns and beams are bolted together with galvanised base, eaves and ridge plates into a rigid frame. Unlike some light, welded box-section frames or wooden structures that require painting and ongoing maintenance, the Abtech Steel Building will be durable and maintenance free for many years.
As the Abtech Steel Building uses cold rolling technology, the energy required to fabricate the frame is extremely low. All the connections are bolted together using standard 8.8 Grade M12x25 bolts and no welding is normally required.
Each element is rolled from a continuous coil of pre-galvanised steel so waste is extremely low.
Abtech steel buildings are completely recyclable making them a sustainable, reusable, environmentally friendly building option.
Since Abtech Steel Buildings do not require the use of chemical preservatives as in the case of wooden structures or paint as with light box-section frames, future contamination is not a concern.
The low weight– high strength nature of the Abtech Steel Building greatly reduces the amount of heavy haulage required for delivery to site and heavy lifting equipment is not normally required during erection.
Due to their modular design, Abtech steel buildings can be expanded quickly and cost effectively by disassembling one end wall and adding extra bays. In most cases, the removed end wall can then be reused. As the building is bolted and screwed together, dismantling and relocation is a simple process.